Design and Fabrication of Baby Health Monitoring Using a Cradle Swinging Module
DOI:
https://doi.org/10.52783/jns.v14.1978Keywords:
Baby cradle, Gear motor, Arduino, Automation, Bluetooth control, Baby MonitoringAbstract
The design and fabrication of an automatic infant cradle rocking machine that can be coupled to any existing market-available mechanical cradle and transformed to an automatic smart cradle rocker was accomplished. This autonomous baby cradle rocker employs a high torque gear motor to facilitate the cradle bed in rocking and allowing the infant to sleep peacefully. In addition to swinging the cradle, this system contains an auxiliary temperature sensor that detects and manages the warmth using a fan to cool the cradle and an embedded humidity sensor that alerts the caregivers when the baby makes the bed wet.
Downloads
Metrics
References
T. Verstraten, G. Mathijssen, R. Furnémont, B. Vanderborght, and Lefeber, “Modeling and design of geared DC motors for energy efficiency: Comparison between theory and experiments,” Mechatronics, July 2015.
Ko Ying hao, Lu-Ean Ooi, Yoon Ket Lee , et al., “Vibration Analysis of Electronic Baby Hammock,” in Transactions on Science and Technology, pp. 3623–3630, March 2016.
Ali A. Hassan, Nabil K. Al-Shamaa, and Kasim K. Abdall, “ Comparative Study for DC Motor Speed Control Using PID Controller,” IJET, pp. 3623–3630, January 2018.
Gerard C.M. Meijer, Guijie Wang, and Ali Heidary, “Smart temperature sensors and temperature sensor systems,” in Smart Sensors and MEMs, vol. 2, pp. 58–85, February 2018.
Tushar P. Patekar1, Pooja S. Dawale2, and Pooja A. Jaiswal 3, “Design and Fabrication of Automatic Baby Cradle System,” in IRJET, Volume: 05 Issue: 02, pp. 973–976, February 2018.
Giovanni Putame, Mara Terzini, Dario Carbonaro, Giuseppe Pisani, Gianpaolo Serino, et al., “Application of 3D Printing Technology for Design and Manufacturing of Customized Components for a Mechanical Stretching Bioreactor,” in Hindawi Journal of Healthcare Engineering Volume 2019, Article ID 3957931, 9 pages, 21 April 2019.
Babangida Ibrahim, V Siva Brahmaiah, and Pradeep Sharma, “Design of smart autonomous remote monitored solar powered lawnmower robot,” Materials Today: Proceedings, 23 April 2020.
S. Maloji, S. Malakonda Sai Lokesh, K. Nikhil Sai, M. Vasavi Prasanna, M. K. Ashwaq, and S. Arunmetha, “An innovative approach for infant monitoring system using movel s.Odi based iot system,” Int. J. Adv. Sci. Technol., vol. 29, no. 6, pp. 3623–3630, 2020.
Daoming Wang, Yan Xiong, Bin Zi, Sen Qian, Zhengyu Wang, and Weidong Zhu, “Design, analysis, and experiment of a passively adaptive underactuated robotic hand with linkage-slider and rack- pinion mechanisms”, in Mechanism and Machine Theory, August 2020.
A. Arjun, P. Umar Ahamed, K. Shahul Hameed, M.P.M. Mohamed Ibraheem, et al., “Experimental analysis of solar wiper and its power estimates.” In Materials Today: Proceedings, 25 September 2020.
Ramesh Saha, Supra Biswas, Satyajit Sarmah, Sushanta Karmakar, and Pranesh Das, “A Working Prototype Using DS18B20 Temperature Sensor and Arduino for Health Monitoring,” in SN Computer Science, Vol 2:33, January 2021.
N. Srilatha, T. Malyadri, V.V.D. Sahithi, and Priyadarsini Morampud, “Design of unmanned guided vehicle for rescue missions,” Materials Today: Proceedings, Proceedings 45 (2021) 3177–3185, pp. 3177–3185, February 2021.
Hongliang Hua, Zhenqiang Liao, Xiaofeng Wu, and Yongjiang Chen, “A Bezier based state calibrating method for low-cost potentiometer with inherent nonlinearity,” Measurement 178 (2021) 109325, 2021.
Grzegorz Kudra, Jose M. Balthazar, Angelo M. Tusset, Grzegorz Wasilewski, Bartosz Stanczyk, and Jan Awrejcewicz, “Dynamics analysis and control of a pendulum driven by a DC motor via a slider-crank mechanism,” Mechanical Systems and Signal Processing, Mechanical Systems and Signal Processing 166 (2022) 108415, August 2021.
Yong Cheng, “Modified PWM Direct Instantaneous Torque Control System for SRM,” Mathematical Problems in Engineering Volume 2021, Article ID 1158360, 13 pages, August 2021.
N Lakshman Pratap, K Anuroop, P Nirmala Devi, A Sandeep, Sunanda Nalajala, “IoT based Smart Cradle for Baby Monitoring System,” ICICT 2021, pp. 1298–1303, 2021.
Tan Jiawan, Yan Langtao , Liu Yusheng, and Huang Sanshan, “Realization of the Ultrasonic Motor Speed Control System Based on H-Bridge,” Mathematical Problems in Engineering Volume 2021, Article ID 8106164, 12 pages, 2021.
Jaysukh C.Songara, and Jayantilal N.Patel, “Measurement Calibration and comparison of various sensors for soil moisture measurement” in Measurement, Volume 197, 30 June 2022.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
Terms:
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
